Hang the steel coil on the uncoiler, tighten the central screw, compress the steel coil, and lock the outer baffle screw. The burr is led up to the turntable, and then the gold looper storage box is pulled.

Before steel strip forming, adjust the dragging speed to the minimum, then adjust the mold appropriately according to the width of steel strip, introduce w mold, adjust the tightness of each mold, and extrude the steel strip forming.

Introduce three roller welding wheel into the steel pipe, adjust the high and low sides and roundness of the pipe, and place the welding line. During welding, first drag and then heat to the East, so as to make the pipeline welding point joint, stably lower the knife

Set the length of the pipe according to the customer's requirements. When the pipe falls into the blanking rack, it shall be placed in order to avoid scratching the pipe surface, and then it shall be packed according to the customer's requirements.

Set the length of the pipe according to the customer's requirements. When the pipe falls into the blanking rack, it shall be placed in order to avoid scratching the pipe surface, and then it shall be packed according to the customer's requirements.